Stand Alone Station
Stand-alone station (no PC Required)
Charge, calibrate, bump test, and alarm test
Included software collects calibration, bump test, alarm history, and exposure date from instruments
Automatically power instruments on / off for scheduled calibration
Accepts GX-6000 with or without rubber boot
SDM-6000 Calibration Station
The SDM-6000 is a versatile maintenance tool that automates the service of a GX-6000 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via SD card (PC software and SD card included).
Modular Design SDM-6000 calibration stations are modular by design and can easily connect to each other without the need of any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 SDM-6000 calibration stations.
Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.
Module Design
Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
No tubing, adaptors or wires needed to connect
One power source for all stations
Configure GX-6000 parameters
Centralize instrument data from multiple stations and locations to one network location
Ethernet port for LAN connectivity
Schedule automatic calibration / bump test
Optional valve expansion module for up to six gas cylinders
Optional battery operated printer
SPECIFICATIONS
Display
Touch panel TFT liquid crystal (3.5 inch, 320×240 image element QVGA, RGB1677 million colors) Back light
LED
3 color [Green, Red, Orange]. Each status is indicated by Lighting / Blinking
BUMP test
Standard setting values
AIR Flush time: 15sec, GAS time: 20sec, AIR Purge time: 5sec
Threshold value: ±50%, Auto Calibration: OFF, Auto alarm function check: ON
Auto print: OFF
Setting range
AIR Flush time: 15~120sec
GAS time: 20~120sec
AIR Purge time: 5~120sec
Threshold value: ±10~50%
Auto calibration: ON, OFF
Auto alarm function check: ON, OFF
Auto print: ON, OFF
Bump test result: Displayed on TFT liquid crystal
Calibration
Standard setting values
AIR Flush time: 30sec, GAS time: 90sec, AIR Purge time: 30sec
Auto alarm function check: ON, Auto print: OFF
Setting ranges
AIR Flush time: 15~120sec
GAS time: 20~120sec
AIR Purge time: 5~120sec
Auto alarm function check: ON, OFF
Auto print: ON, OFF
Calibration result: Displayed on touch screen display
Power (AC adaptor)
100~240VAC~50/60Hz
Dimension, weight
5.11”(W) x 13’(H) x 7.2”(D)in Approx. 3.7lb
Operation temperature, humidity
0~104F, below 95~RH (no condensing)
USB printer port
A type: Connects SDM-6000 printer (SII, DPU-S245) via USB cable
RJ-45 connector
Ethernet port for a LAN connection
SD card slot
Compatible with SD & SDHC cards
Joint connector
Connecting SDM-6000 (Max 10 units) and SV-3
Inlet
4 inlets: GAS 1 / GAS 2 / GAS 3 / AIR
Certification
CE marking
Standard Functions
Charging, Cal. cap fitting status monitoring, Power ON function, Alarm activation check, multi language (English, German, Japanese, Korean, Russian, Portuguese, Spanish, Italian, French), backlight adjusting, buzzer function, self-diagnosis for instruments connection
Standard accessory
Operating manual, filter, connecting plate, wall mount plate, PC controller software
Software
PC controller software included as standard. Windows 7 & 10 compatible
Optional accessory
SV-3 solenoid valve adds 3 additional calibration gas inputs
AC adaptor (15W output), AC adaptor (100W output)
Calibration Station utility software
Calibration gas & regulators
Tubing
Battery powered printer
Specifications subject to change without notice.
Ordering Information
The SDM-6000 can be ordered using the part numbers from the list below.
Docking Station
81-SDM6000
GX-6000 docking station with particle filter, connection brackets, and 10’ exhaust tube (no AC adapter)
81-SDM6000-01
Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, and single unit AC adapter
81-SDM6000-02
Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, and multi-unit AC adapter
81-SDM6000-03
Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, demand flow regulator, and cal gas tubing
81-SDM6000-04
Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, demand flow regulator, cal gas tubing, 58AL cyl H2S/CO/CH4/O2, and cylinder holder
81-SDM6000-05
Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, demand flow regulator, cal gas tubing, 58AL cyl 100 ppm isobutylene/H2S/CO/CH4/O2, and cylinder holder
81-SDM6000-06
Calibration station for SDM-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, demand flow regulator, cal gas tubing, 34AL cyl 100 ppm isobutylene/air, and cylinder holder
81-SDM6000-07
SDM-6000 calibration station for GX-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, demand flow regulator, cal gas tubing, 34AL cyl H2S/CO/CH4/O2, and cylinder holder
81-SDM6000-08
SDM-6000 calibration station for GX-6000, includes particle filter, connection brackets, exhaust tubing, USB cable for PC, SD card, USB SD card reader, ethernet cable, single unit AC adapter, 2 demand flow regulators, cal gas tubing, 34AL cyl H2S/CO/CH4/O2, 34AL HCN/N2, and 2 cylinder holders
81-SV3
SV-3 solenoid valve unit, with connection brackets, for 6 cylinder expansion with SDM-6000
Call for additional configurations
SDM-6000 Software
SDM-6000 PC Controlled Software 34MB version 06669
Noncompliance Dashboard 42.5MB version 1.0.2
PC Controlled Configuration manual 4.5MB
RKI Noncompliance Dashboard 2.4MB
SDM-6000 Literature
SDM-6000 Datatsheet
SDM-6000 Brochure
SDM-6000 User Guide
SDM-6000 Manuals
SDM-6000 Calibration Station Standalone Configuration Manual
SDM-6000 Calibration Station PC Controlled Manual
